Brother Service Manual Model MFC9600-MFC9850-MFC9870-DCP1200-MFC9750

Brother Service Manual Model MFC9600-MFC9850-MFC9870-DCP1200-MFC9750, covering the specifications, construction, theory of operation, and maintenance of the Brother machine. It includes information required for field troubleshooting and repair–disassembly, reassembly, and lubrication–so that service personnel will be able to understand machine function, to rapidly repair the machine and order any necessary spare parts.

To perform appropriate maintenance so that the machine is always in best condition for the customer, the service personnel must adequately understand and apply this manual.


This manual is made up of six chapters and appendices.
CHAPTER I.     GENERAL DESCRIPTION
CHAPTER II.   INSTALLATION
CHAPTER III. THEORY OF OPERATION
CHAPTER IV.  DISASSEMBLY/REASSEMBLY AND LUBRICATION
CHAPTER V.    MAINTENANCE MODE
CHAPTER VI.  ERROR INDICATION AND TROUBLESHOOTING
Appendix 1. EEPROM Customizing Codes
Appendix 2. Circuit Diagrams

This manual describes the models and their versions to be destined for major countries. The specifications and functions are subject to change depending upon each destination.

SAFETY INFORMATION

Laser Safety (110-120V Model only)
This printer is certified as a Class 1 laser product under the US Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation emitted inside the printer is completely confined within the protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
CDRH Regulations (110-120V Model only)

The Center for Device and Radiological Health (CDRH) of the US Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

Machine Outline :

1. External Appearance and Weight, The figure below shows the machine appearance and approximate dimensions.




2. Components, The machine consists of the following major components:

Control Panel Model MFC9600-MFC9850-MFC9870-DCP1200-MFC9750 :

You can get FREE DOWNLOAD the Brother Service Manual Model MFC9600-MFC9850-MFC9870-DCP1200-MFC9750