Kyocera FS 9100 Manual Reference Guide

This Kyocera fs 9100 manual publis on September 2001, revision 2.1 with 200 pages english language. Like the other, this ebook describe how to instalation, maintenance, service etc.
Contents for this ebook :
1. Specification, you can see the brocure
2. Handling precautions, Drum
Note the following when handling or storing the drum.
• When removing the image formation unit, never expose the drum surface to strong direct light.
• Keep the drum at an ambient temperature between –20 °C/–4 °F and 40 °C/104 °F and at a relative humidity not higher than 85% RH. Avoid abrupt changes in temperature and humidity.
• Avoid exposure to any substance which is harmful to or may affect the quality of the drum.
• Do not touch the drum surface with any object. Should it be touched by hands or stained with oil, clean it.
3. Instalation, be careful with instal this machine, better do by technician
4. Service and maintenance mode. Service mode, The printer is equipped with the service mode that can be accessed in the manu system. The service mode is intended for use by the service person for maintenance and service for the items explained in the following sections. Maintenance mode, The printer is equipped with a maintenance function which can be used to maintain and service the machine. To run the maintenance mode, Insert a compact flash card to which the API program has been written into the printer and load the API program to the printer using either method.
* Turn off and on the printer. The API program will be automatically loaded into the printer.
* Load the API program with read program.
* Enter the MENU mode and display the [>>Read Program Maintenance API] in the [Memory Card>], then press the ENTER key.
The maintenance mode can be executed from the MENU mode.
If the compact flash card is removed from the printer and then the printer is turned off and on, the API program will be
deleted from the printer and the maintenance mode will be deleted from the MENU mode.
5. Troubleshooting
6. Assembly and disassembly
7. Downloading printer firmware for upgrade
8. Mechanical construction
9. Electrical parts layout
10. Operation of the PWBs
Don’t forget read the Safety precautions, before you service or maintenance. Than you can get this manual free by download here